This is a body style created by us modifying a 32 3 window coupe body. The body was lengthened behind the doors by 70mm. This moved the cowl and bonnet forward so a shorter front apron was made. A new swage around the back of the interior compartment was made closer to the boot. This created more room inside for a rear seat if required. The rear fenders were moved up the body by 40mm. Rear fenders were lengthened in the front and shortened at the rear. A tapered bonnet, 50mm shorter grill and moulded in headlight stalks completed the slick look. Will fit a stock chassis. Removable roof, Soft top roof available.
- Plain flat or stock or 50mm firewall
- No cowl vent
- No swage on cowl behind bonnet
- Plain dash or HiTec moulded creation
- Tubbed 50mm
- Window channels & electric regulator in doors
Refer to Standard Framing and Features for more information
EXTRAS
ROOF
With steel framing and back window surround
FENDER PACKAGE
Includes two front fenders, two running boards, two rear fenders, roll pan
SHORTEND GRILL COMPLETE (50mmLower)
Using our fibreglass shell listed below, it has 43 folded steel bars installed into slots. These bars are installed using a jig and the result is perfection. Stainless steel bars are additional
TAPERED BONNET TOP (25mm Lower at the front)
A one piece top with an inward flange along the sides for strength and for mounting bonnet hinge kit.
BONNET SIDES (pair)
Plain look, with an inward flange along top and bottom for strength and mounting. Can be made stock length or 35mm longer
REAR ROLL PLAN
50mm deep
128mm deep with number plate recess
RUMBLE SEAT
This option uses strong mounting points off the chassis to prevent cracks appearing in the bodywork. Extra steel is also installed inside the boot lid
HEADLIGHT STALKS (pair)
Chopped fibreglass moulded onto front fenders
REMOTE CONTROL LOCKING
RUBBER KIT